Programmable Quadpacer

About Programmable Quadpacer

Programmable Quadpacer works like the Quadpacer feature by providing signals at 30 second intervals (30, 60 and 90 seconds for a 2 minute brushing cycle) to indicate that you should begin brushing the next quadrant of your mouth. It is programmable because it allows you to extend the brushing time by another 30 seconds so that you can focus on problem areas.

How it Works

The Programmable Quadpacer feature allows you to adjust the Quadpacer performance in 1 of 3 ways:

1. Keep the factory default setting of a 2 minute brushing time with Quadpacer beeps activated.


2. Choose to extend your brushing time to 2 ½ minutes by adding an additional timing interval of 30 seconds.


3. Choose a 2 minute brushing time, but with the Quadpacer beeps turned off.
   

   To change the Quadpacer settings:

   1. Place the handle into the charger base that is plugged into a live electrical outlet.
   2. Press the Dual Speed Control button briefly and note which LED (light display) is shown. Release
   3. Press and hold the Dual Speed Control button. Continue to hold the button while the LEDs slowly cycle through the timing interval setting choices:
      

      •	Green LED in position 4; Quadpacer active (factory default setting).
      •	Green LED in top (5th) position; 2 1/2 minute setting - Quadpacer active with additional timing interval of 30 seconds.
      •	Yellow LED in bottom (1st) position; no timing intervals set -Quadpacer not active.

      
      
4. To program your desired setting, release the button when the LED corresponding to your choice lights up.

Programmable Quadpacer is great for targeting those troublesome areas that require more conscientious brushing (typically suggested by your dentist or hygienist). It not only ensures that you are giving each area of your mouth the oral care it needs, but you are also devoting extra time to any problem areas.

Which Models Have It

The following models feature Programmable Quadpacer.

Elite

9500